Nano Proseal-TC
Nano Proseal-TC is a protective sealant transparent waterproofing chemical. NPTC is a weatherproof sealant chemical. NPTC is a light milky liquid, which turns transparent after curing. NPTC enters into fine pores of the surface and seals them. It makes a thin transparent film with 2-3 coats and protects the surface from weather attacks. It Protects your Exterior Elevation from Environmental attacks.
Introduction
Qualities
Application Area
Application Procedure
Packaging Available
Introduction
Nano Proseal-TC is a protective sealant transparent waterproofing chemical. NPTC is a weatherproof sealant chemical. NPTC is a light milky liquid, which turns transparent after curing. NPTC enters into fine pores of the surface and seals them. It makes a thin transparent film with 2-3 coats and protects the surface from weather attacks. It Protects your Exterior Elevation from Environmental attacks.
Qualities
- 100% Waterproofing transparent chemical coat.
- No change in the appearance of the original surface.
- Protects and increases the life of the treated surface.
- High penetration due to low surface tension.
- Air drying and single-component material.
- Antifungal and eco-friendly (aqua base).
Application Area
- All types of sandstones, slates, brickwork, concrete, wood, marble, granites, limestones, cast stones etc.
- Apply on the backside of stones before laying on the floor to avoid seepage spots.
Application Procedure
- Shake the container well before use.
- Can be applied with a brush, sponge and also can be sprayed easily.
- Minimum of 2 coats recommended for better result
- Every coat is applied in intervals of 30-40 mins.
- More the coat applied more gloss can be achieved
- Let the coat cure for at least 24 hrs.
Packaging Available
- 20 Ltr.
- 5 Ltr.
- 1 Ltr.