Natural Stone Sealer - SB
Natural Stone Sealer – SB is an invisible waterproofing sealer that seals all types of natural stones, bricks, pavers, tiles, engineering concrete etc. Easy to apply with high penetration. Maintains the original look of the surface. An economical, no-sheen, natural look, penetrating sealer designed to resist water and stains. It May also be used as a pre-grouting sealer.
Introduction
Qualities
Application Area
Application Procedure
Packaging Available
Introduction
Natural Stone Sealer – SB is an invisible waterproofing sealer that seals all types of natural stones, bricks, pavers, tiles, engineering concrete etc. Easy to apply with high penetration. Maintains the original look of the surface. An economical, no-sheen, natural look, penetrating sealer designed to resist water and stains. It May also be used as a pre-grouting sealer.
Qualities
- 100% Waterproofing transparent chemical coat.
- The slight appearance of the original surface.
- Protects and increases the life of the treated surface.
- High penetration due to low surface tension.
- Air drying and single-component material.
Application Area
- AAC Block CC surface
- Rock face Stones
- Bricks, Pavers & Highly Porous surface
- Stone/Floor Care Polishing & Coatings
Application Procedure
- Shake the container well before use.
- Can be applied with a brush, sponge and also can be sprayed easily.
- Minimum of 2 coats recommended for better result
- Every coat is applied in intervals of 30-40 mins.
- The area should be well ventilated
- Let the coat cure for at least 24 hrs.
Caution: . The applicators and operators must be trained, experienced and have the understanding and equipment to mix/stir and apply the coatings correctly and according to Nushar technical protocol. Applicators and operators shall use appropriate personal protection when using these products.
Packaging Available
- 20 Ltr.
- 5 Ltr.
- 1 Ltr.
